薄镜面主动光学力促动器组控制软件系统设计  

Design of controlling software for force actuator group of thin-mirror active optics

作　　者：王亮[1,2] 陈涛[1] 张斌[1] 刘欣悦[1] 李宏壮[1] 张振铎[1] 

机构地区：[1]中国科学院长春光学精密机械与物理研究所,吉林长春130033 [2]中国科学院大学,北京100049

出　　处：《红外与激光工程》2013年第11期2984-2989,共6页Infrared and Laser Engineering

基　　金：国家863高技术研究发展计划(2012AAXXX1003X);中国科学院第三期创新工程资助项目

摘　　要：设计了上位机软件系统,对用于薄镜面主动光学的力促动器组进行控制实验。首先,从功能和性能两方面分析了力促动器组控制实验对软件系统的需求。然后,根据应用需求设计了校正、实验、装调、停机、复位5种工作模式,并讨论了不同工作模式之间的转换条件。接下来,将软件系统按应用层次分为数据传输、数据处理、界面3个模块,并给出了每个模块的设计方案。最后,在各个工作模式下对软件系统进行了测试,并在校正模式下对铝镜进行了校正实验,测试和实验结果表明,此软件系统可以满足预期的实验需求。A software was designed for controlling experiments of an force actuator group, which was intended to be used in thin-mirror active optics. In the beginning, requirements of the controlling experiments on the software were analyzed, from both function angle and performance angle. Also, five working modes, such as correcting mode, testing mode, installing mode, stopping mode and restoring mode, were designed for the software according to practical requirements, and transition conditions between different working modes were discussed. Afterwards, the software was divided into three modules, such as data-transmission module, data-procession module and user-interface module, and design of each module was explained. Finally, the software was tested with each working mode, and a correcting experiment with an aluminum mirror was conducted in the correcting mode. Results of the test and the correcting experiment show that this software can meet almost all the anticipative requirements of the force actuator group experiments.

关 键 词：主动光学 力促动器组 上位机软件系统 工作模式 模块化 

分 类 号：TP274[自动化与计算机技术—检测技术与自动化装置]