SJT-B溶胶在低渗透油层的注入方式  

INJECTING PATTERN OF SJT-B COLLOSOL INTO THE LOW-PERMEABILITY OIL RESERVOIRS

作　　者：张垒垒[1] 徐启[2] 史连杰[2] 王克亮[1] 

机构地区：[1]东北石油大学提高油气采收率教育部重点实验室,黑龙江大庆163318 [2]大庆油田有限责任公司第十采油厂,黑龙江大庆166405

出　　处：《大庆石油地质与开发》2013年第6期117-120,共4页Petroleum Geology & Oilfield Development in Daqing

基　　金：省高校科技创新团队“提高油气采收率原理与技术”(2009td08)

摘　　要：调驱技术是提高低渗透油藏采收率的有效方法，成功的关键在于分析油水界面关系和确定注入方式。界面张力和封堵率实验表明：在45℃条件下，质量分数为0．8％的SJT—B溶胶，30d内体系平衡界面张力稳定在5．86×10-3mN／m；岩心渗透率越低，封堵率越高。以优选的注入方式进行三管并联调驱实验，发现在低渗透非均质岩心中，sJT—B溶胶主要进入了高渗透层，中渗透层的吸液量显著增加，低渗透层吸液量小幅度增加。SJT—B溶胶对注水开发后期的低渗透油藏调驱效果良好。Adjusting and flooding technique is an effective way to enhance the oil recovery of low-permeability res- ervoirs, the key to succeed is to analyze the relation between the oil and water interfaces and make sure of the in- jecting pattern. The experiments of the interfacial tension and plugging rate show that under the temperature of 45 ℃, the system-balancing interfacial tension can be stablized by 5.86×10-3 mN/m for a month for SJT-B collo- sol with 0. 8 % mass fraction ; the lower the core permeability is, the higher the plugging rate. The three-tube paral- lel profile-controlling and flooding experiment with the help of the optimized injecting pattern finds out in the low- permeability heterogeneous core, the sol is mainly penetrated into the reservoirs with high permeability, and the ab- sorbed liquid rate （ fluid uptake） in the medium-permeability reservoirs is greatly increased, and moreover the rate of the low-permeability ones is still enhanced on a small scale. SJT-B collosol is characterized by much better pro- file-controlling and flooding effects for the low-permeability oil reservoirs at the late stage of water-flooding development.

关 键 词：调驱 溶胶 界面张力 渗透率 封堵率 调剖 采收率 

分 类 号：TE357[石油与天然气工程—油气田开发工程]