10kJ高能脉冲激光器直驱式电源系统的分析和设计  

Analysis and Design of a 10kJ Directly Driven Power Supply System for High Energy Pulsed Lasers

作　　者：袁培[1] 于克训[1] 叶才勇[1] 

机构地区：[1]华中科技大学电气与电子工程学院强电磁工程与新技术国家重点实验室,武汉430074

出　　处：《电工技术学报》2013年第11期223-230,共8页Transactions of China Electrotechnical Society

基　　金：国家自然科学基金资助项目(51077060;51107046)

摘　　要：脉冲激光器直驱式电源系统使用主动补偿脉冲发电机代替传统的电容器组来直接驱动脉冲氙灯泵浦进行放电。本文从主动补偿脉冲发电机驱动脉冲氙灯负载的数学模型出发,研究了电机与氙灯参数相互匹配和选择的关系,进行了氙灯的负载特性分析,在此基础上提出了样机的设计方案,并运用Ansoft进行磁场有限元分析对样机的电磁性能进行核算,最终把核算的结果代入Matlab/Simulink搭建的系统模型中进行氙灯电气输出性能的仿真运算,仿真的结果表明了本论文中阐述的方法可以正确、方便地应用于主动补偿发电机驱动脉冲氙灯负载构成的电源系统的分析与设计中,并可以推广到由其他类型的电机驱动其特定的负载构成的电源系统的分析与设计中。The directly driven power supply system for high energy pulsed lasers mainly consists of an active compensated alternator（ACPA） and its flashlamp load. Unconventionally, the ACPA replaces the capacitor groups to discharge to the flashlamp pump directly. This paper investigates into the mathematic model of the ACPA with flashlamp load, and the relationships of both of the parameters are analyzed to match up. Then, based on the performances of the flashlamp load, a design process of ACPA prototype is proposed. The finite element analysis（FEA） is performed basing on to the ACPA prototype with the assistance of Ansoft maxwell, and the electromagnetic properties are estimated. Meanwhile, the system is modeled in Matlab/Simulink to analyze the electrical output performance of the flashlamp load. The simulation results prove that the proposed method can be correctly and conveniently applied in the analysis and design of the directly driven power supply system. It can also be extended to the power supply systems which consist of other types of generators indivdually their specific loads.

关 键 词：直驱式电源系统 主动补偿脉冲发电机 脉冲氙灯负载 参数匹配 分析与设计 

分 类 号：TP303.3[自动化与计算机技术—计算机系统结构]