镁铝叠层板的热轧成型及拉深性能研究  

Hot rolling forming and drawing of magnesium-aluminum clad plate

作　　者：杨周林[1] 池成忠[1] 梁伟[1] 李辰[1] 

机构地区：[1]太原理工大学材料科学与工程学院,山西太原030024

出　　处：《兵器材料科学与工程》2013年第6期39-42,共4页Ordnance Material Science and Engineering

基　　金：国家自然科学基金资助项目(51175363;51274149)

摘　　要：采用热轧法将5052板坯和AZ31板坯按组料方式加热、轧制成型出一种镁铝叠层板,采用单向拉伸实验测定其力学特性,利用MDS金相显微镜观察镁铝叠层板复合界面扩散层厚度和基体晶粒尺寸变化,优选了轧后热处理工艺。并在室温及120℃条件下,采用刚模拉深试验对镁铝叠层板和AZ31镁合金板进行极限拉深系数测定。结果表明,轧后200℃退火能明显提高其力学特性,镁铝叠层板拉深成形性能略优于AZ31镁合金板。Hot rolling method was applied to form magnesium-aluminum clad plate,which is composed of 5052 sheets and AZ31 sheet. Uniaxial tensile experiments were used to test the mechanical properties,and the thickness of interface diffusion layer and grain size of matrix of magnesium-aluminum clad plate were observed by MDS metallographic microscope. The heat treatment process after hot rolling was optimized. The limit drawing coefficient of magnesium-aluminum clad plate and AZ31 magnesium alloy sheet was determined by drawing test at room temperature and 120 ℃. The results show that annealing at 200 ℃ can significantly improve the mechanical properties,and the drawing property of magnesium-aluminum clad plate is slightly higher than that of AZ31 magnesium alloy sheet.

关 键 词：镁铝叠层板 热轧 极限拉深系数 

分 类 号：TG389[金属学及工艺—金属压力加工]