Interfacial Microstructure and Properties of a Vacuum Hot Roll-bonded Titanium-Stainless Steel Clad Plate with a Niobium Interlayer  

作　　者：Zongan LUO Guanglei WANG Guangming XIE Lipeng WANG Kun ZHAO 

机构地区：[1]State Key Laboratory of Rolling and Automation,Northeastern University [2]Shougang Jingtang Iron & Steel Co.,Ltd.

出　　处：《Acta Metallurgica Sinica(English Letters)》2013年第6期754-760,共7页金属学报（英文版）

基　　金：financially supported by the Fundamental Research Funds for Chinese Central Universities(No.N110607001);National High Technical Research and Development Programme of China(No.2013AA031302)

摘　　要：Vacuum hot roll bonding （VHRB） was used to bond pure titanium （Ti） plate to a 304 stainless steel （SS） plate with a niobium （Nb） interlayer, with the aim of producing a high-quality Ti-SS clad plate. The roll-bonding process was performed at different temperatures in the range of 850-1000℃, followed by characterization of microstructure and mechanical properties. The study demonstrates that the interfaces are free from cracks and discontinuities, and interdiffusion between the stainless steel and the titanium is effectively prevented by inserting a layer of pure Nb foil. No intermetallic reaction layer occurred at the Nb-Ti interface at any of the investigated temperatures. An intermetallic FeNb phase was formed at the Nb-SS interface when bonding was performed at 950 ℃ and above. The presence of the FeNb layer was confirmed by x-ray diffraction. The maximum shear strength of -396 MPa was obtained when bonding is carried out at 900 ℃. However, the formation of the FeNb layer at roll bonding temperature greater than 900 ℃ led to decrease in shear strength. Ductile fracture occurred through the Ti-Nb interface for roll-bonded temperatures of up to 900 ℃. On the other hand, at temperature of 950℃ and above, failure occurred through the Nb-SS interface, with brittle fracture characteristics.Vacuum hot roll bonding （VHRB） was used to bond pure titanium （Ti） plate to a 304 stainless steel （SS） plate with a niobium （Nb） interlayer, with the aim of producing a high-quality Ti-SS clad plate. The roll-bonding process was performed at different temperatures in the range of 850-1000℃, followed by characterization of microstructure and mechanical properties. The study demonstrates that the interfaces are free from cracks and discontinuities, and interdiffusion between the stainless steel and the titanium is effectively prevented by inserting a layer of pure Nb foil. No intermetallic reaction layer occurred at the Nb-Ti interface at any of the investigated temperatures. An intermetallic FeNb phase was formed at the Nb-SS interface when bonding was performed at 950 ℃ and above. The presence of the FeNb layer was confirmed by x-ray diffraction. The maximum shear strength of -396 MPa was obtained when bonding is carried out at 900 ℃. However, the formation of the FeNb layer at roll bonding temperature greater than 900 ℃ led to decrease in shear strength. Ductile fracture occurred through the Ti-Nb interface for roll-bonded temperatures of up to 900 ℃. On the other hand, at temperature of 950℃ and above, failure occurred through the Nb-SS interface, with brittle fracture characteristics.

关 键 词：Vacuum hot roll bonding （VHRB） Clad plate INTERLAYER Interface SHEARSTRENGTH Intermetallic compound 

分 类 号：TG111[金属学及工艺—物理冶金]