超支化聚合物的合成、表征及其对水性聚氨酯膜性能的影响  

The Synthesis and Characterization of Hyperbranched Polymer and Its Influence on the Waterborne Polyurethane Films

作　　者：陈正宇[1] 程秀美[1] 吴智超[1] 白念钊[1] 邱凤仙[1] 杨冬亚[1] 

机构地区：[1]江苏大学化学化工学院,镇江212013

出　　处：《材料导报》2013年第22期85-87,共3页Materials Reports

基　　金：中国博士后科学基金(2011M500865);江苏省博士后科研资助计划(1002033C)

摘　　要：利用"准一步法",以甲基丙烯酸甲酯与二乙醇胺反应合成出AB2型单体,引入中心核三羟甲基丙烷,通过控制反应条件,合成出了不同代数的端羟基超支化聚酯H1、H2、H3。测得其在常温下的特征粘度分别为3.54mL/g、2.97mL/g和2.62mL/g。且随着温度升高,相应超支化聚合物的特征粘度降低。同时以其为改性剂,采用原位聚合法对一系列水性聚氨酯(PU)进行了交联改性。研究结果表明,与线性PU相比,所得超支化改性水性PU成膜后均具有较好的耐水性和热性能。The AB2 monomer base on MMA and DEA was prepared through Michael addition reaction.Trimethylolpropane （TMP） used as the centronucleus,and different generations of hydroxyl-terminated hyperbranched polyesters （H1,H2,H3） were synthesized by gradually increase polymerization reaction.The intrinsic viscosities of the hyperbranched polyesters were obtained as 3.54 mL/g,2.97 mL/g and 2.62 mL/g,respectively.With the increasing of temperature,the intrinsic viscosities of the hyperbranched polyesters decreased.A series of polyurethane emulsions （HPU） cross-linked with these hyperbranched polyesters （H1,H2 and H3） as modifiers were prepared and the results indicated that compared with the PU,the modified HPU films had better water-resistance and stronger thermal properties.

关 键 词：超支化聚合物 本征粘度 原位聚合 耐水性 

分 类 号：TQ63[化学工程—精细化工] O63[理学—高分子化学]