轴承套圈锻件热变形收缩系数的应用  

Application of thermal deformation shrinkage coefficient of bearing ring forging

作　　者：姜岩 

机构地区：[1]西北轴承股份有限公司锻造分厂,宁夏银川750021

出　　处：《锻压技术》2013年第6期25-27,共3页Forging & Stamping Technology

摘　　要：轴承套圈锻件锻造成形后,在冷却过程中会产生热变形收缩,因此需要随时测量终锻时套圈尺寸,但是套圈尺寸热检过程中通常存在误判问题。为了解决套圈尺寸热检误判问题,本文采用数理统计原理回归分析方法,研究了轴承套圈锻件热变形收缩系数的3种计算方法;并对这3种计算方法的误差进行比较后计算出"套圈锻件热检对照表";根据"套圈锻件热检对照表",对锻件锻造成形后尺寸的热检,确保锻件最终冷却后符合工艺尺寸的精度要求。After bearing ring forgings are forged, the dimension of finished forgings is needed to be measured at any time because of thermal deformation shrinkage in cooling process. However, there is a misjudgment on dimension in the process of thermal detection usually. In order to solve the problem of thermal detection misjudgment, three deter- mination methods for thermal deformation shrinkage coefficient were studied by the principle of mathematical statistics and regression analysis method, and the deviation of the three methods were compared, then the ＂ Temperature and dimension table on forgings＂ was figured out. Based on the table, the thermal detection on forging dimension was car- ried out to ensure that the cooled forgings can meet process requirements.

关 键 词：轴承套圈锻件 热检误判 热变形收缩系数 回归分析 

分 类 号：TG316.192[金属学及工艺—金属压力加工]