检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘玲[1] 袁中直[1] 邱彩霞[1] 余思恩 刘金成
机构地区:[1]华南师范大学化学与环境学院,广东广州510006 [2]惠州亿纬锂能股份有限公司,广东惠州516006
出 处:《电源技术》2013年第12期2130-2131,共2页Chinese Journal of Power Sources
摘 要:为研究二(三氟甲基磺酰)亚胺锂(LiTFSI)对Li/FeS2电池电化学性能的影响,将LiTFSI作为添加剂加入到1 mol/L LiI/(DOL+DME)电解液中,以此电解液制作得到的AA型Li/FeS2实体电池,在60℃高温和-40℃低温下的放电容量和放电电压都得到了提高。当LiTFSI添加量为0.5%(质量分数)时放电性能达到最佳,60℃下1 A放电容量可达3 200 mAh,-40℃下250 mA放电容量可达3 108 mAh。同时,电池的大电流放电性能也得到了改善。In order to study the effect of lithium bis (trifluoromethanesulfonyl) imide (LiTFSI) on the electrochemical performance of Li/FeS2 battery, LiTFSI was used as an additive in 1 mol/L Lil/DOL+DME electrolyte solution. The results show that the addition of LiTFSI to electrolyte in AA-size Li/FeS2 cell leads to an improvement in discharge capacity and the discharge voltage platform at 60 ℃ and --40℃. Additive amount of 0.5% shows the optimum electrochemical performance, the discharge capacity can reach 3 200 mAh at a discharge current of 1 A at 60 ℃, and 3 108 mAh at 250 mA at -40℃. Meanwhile, the high-rate discharging performance of the Li/FeS2 cell was also improved.
关 键 词:LI FeS2电池 放电 温度范围 LITFSI
分 类 号:TM912[电气工程—电力电子与电力传动]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28