检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]中国科学技术大学热科学和能源工程系,安徽合肥230026
出 处:《安徽建筑工业学院学报(自然科学版)》2013年第5期100-104,共5页Journal of Anhui Institute of Architecture(Natural Science)
基 金:"十二五"国家科技支撑计划(2012BAJ08B04)
摘 要:针对两种不同结构的双效太阳能平板集热器,建立上流道和双流道两种结构双效集热器的空气集热模型,以热力学第一定律和第二定律为基础,综合考虑空气集热效率和净有效能的情况下,研究了两种空气流道结构条件下,流道高度对集热器性能的影响。结果表明,对于上流道结构的空气集热器,流道高度为15mm时,热效率和净有效能均最高,15mm是上流道式集热器的适宜流道高度;对于双流道结构的空气集热器,上、下流道高度均为15mm至25mm间时热效率和获得的净有效能最高。In this paper mathematical model for the single duct and double duct dual-function solar col- lectors working in air heating mode has been set up. The effect of the channel depth on the energy gain and net energy gain of dual-function solar collectors has been investigated. Based on the first and second laws of thermodynamics, the optimal channel depth for single duct dual-function solar collector is suggested as 10 mm. For double duct dual-function solar collectors, the optimal channel depths should be 15--25mm to get maximum heat and energy.
分 类 号:TK519[动力工程及工程热物理—热能工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.60