基于GTM法的温拌胶粉改性沥青混合料设计研究  被引量:7

Design and Research on the Warm-Mix Rubber-Modified Asphalt Mixture Based on the GTM Method

在线阅读下载全文

作  者:李正中[1,2] 魏如喜[1,2] 宋晓燕[1,2] 朱涵[3] 马涛[4] 

机构地区:[1]天津市市政工程研究院,天津300074 [2]天津市路桥技术工程中心,天津300074 [3]天津大学建筑工程学院,天津300072 [4]东南大学交通学院,江苏南京210096

出  处:《建筑材料学报》2013年第6期968-974,共7页Journal of Building Materials

基  金:国家自然科学基金资助项目(51008075)

摘  要:采用GTM(旋转试验机)法,以试件体积参数相等为判据,综合确定Evotherm温拌胶粉改性沥青混合料的适宜成型温度和拌和温度.采用两阶段设计法,基于双参数体系,以热拌胶粉改性沥青混合料配比设计数据为基础,对Evotherm温拌胶粉改性沥青混合料沥青用量和试验温度进行设计,从材料组成和体积参数两方面来双重保证其路用性能.然后,对所设计的Evotherm温拌胶粉改性沥青混合料进行路用性能试验并与对应的热拌胶粉改性沥青混合料对比分析.结果表明:与马歇尔法相比,GTM法可以降低Evotherm温拌胶粉改性沥青混合料的适宜成型温度;GTM法所设计的Evotherm温拌胶粉改性沥青混合料的高、低温性能及抗水损害性能均优于热拌胶粉改性沥青混合料,而且,其抗压回弹模量与热拌胶粉改性沥青混合料基本相当,不影响路面结构设计.By using GTM(gyratory testing machine) method, with equal specimen volume parameters as the crite- rion, the suitable molding and mixing temperature of Evotherm warm-mix rubber-modified asphalt mixture was determined. By using two-stage design method, on the basis of hot-mix rubber-modified asphalt mixture mixing ratio test and the two-parameter system, the asphalt content and test temperature of warm-mix rubber-modified asphalt mixture was designed to ensure the pavement performance in terms of material composition and volume parameters. Then pavement performance test of the designed warm-mix rubber-modified asphalt mixture was con- ducted and the comparative analysis of the corresponding hot-mix rubber-modified asphalt mixture was made. The test results show that GTM method could decrease the suitable molding temperature of warm-mix rubber-modified asphalt mixture compared with Marshall method. Moreover, the low and high temperature performances as well as the water damage resistant performance of warm-mix rubber-modified asphalt mixture based on GTM are superior to that of hot-mix rubber-modified asphalt mixture, and its compression modulus is roughly equal to that of the hot-mix rubbevmodified asphalt mixture, which would not affect the pavement structure design.

关 键 词:GTM(旋转试验机) Evotherm温拌技术 胶粉改性沥青混合料 设计研究 

分 类 号:U414[交通运输工程—道路与铁道工程] U416.217

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象