基于ADAMS宏程序的桥塔检测机钢丝绳系统建模  

Study on Modeling the Cable System of Bridge Tower Testing Machine Based on ADAMS Macro Programs

作　　者：杜子学[1] 刘明东[1] 

机构地区：[1]重庆交通大学机电与汽车工程学院,重庆400074

出　　处：《机械设计与研究》2013年第6期140-143,共4页Machine Design And Research

基　　金：国家自然科学基金项目(50608072)

摘　　要：利用ADAMS对桥塔检测机进行多体动力学仿真是桥塔检测机开发的重要研究内容。在建立虚拟样机时,针对检测机中的钢丝绳系统无法直接建模的技术难题,利用ADAMS的二次开发功能宏程序,采用轴套力连接,创建并模拟了钢丝绳系统。为桥塔检测机多体动力学仿真创造了条件,也为其它类似机械系统提供了有效的钢丝绳建模方法。It is important for developing the bridge tower testing machine and simulating the machine with ADAMS software. While building the virtual prototype, the creation of the cable system is a technical problem. With the help of macro command in the secondary development functions of ADAMS, the model of the cable system can be built successfully,in which the bushing connection method was adopted. The method creates a condition for simulating the bridge tower testing machine, and offers an effective modeling method for other similar mechanical systems.

关 键 词：桥塔检测机 宏程序 钢丝绳 轴套力 接触力 

分 类 号：TP319.9[自动化与计算机技术—计算机软件与理论]