太阳辐射计检定用多维工作台的研制  

The Development of Multi-dimensional Workbench for Solar Radiaometer Verification

作　　者：李志强[1,2] 苏拾[1,2] 王凌云[1,2] 张国玉[1,2] 陈曦[1] 

机构地区：[1]长春理工大学光电工程学院,长春130022 [2]吉林省光电测控仪器工程技术研究中心,长春130022

出　　处：《长春理工大学学报（自然科学版）》2013年第6期46-49,共4页Journal of Changchun University of Science and Technology(Natural Science Edition)

基　　金：国家公益性行业科研专项资助项目(GYHY200706003;GYHY201006043);吉林省科技发展计划项目(20118012)

摘　　要：针对太阳辐射计量仪表进行检定的需要,提出了一种具有四个自由度功能动作的多维检定工作台。工作台在与太阳模拟器联合,可同时对两块待检仪表的参数误差进行检定。在对太阳高度角和方位角的研究基础上,阐述了工作台旋转机构、升降机构、俯仰机构和转臂机构的设计过程,并对工作台的控制系统进行了说明。测试结果表明多维工作台各级转动误差小于0.05°,由倾角仪和步进电机组成的台面水平控制误差在±10′以内,满足设计指标要求。For the verification needs of solar radiation measuring instruments, a multidimensional workbench with four degrees of freedom movement was proposed. In conjunction with a solar simulator, it can simultaneously test parameter errors of the two instruments to be seized for verification. Based on the study of the solar akitude angle and the azi- muth angle, elaborateing the design process about the table＇s rotation mechanism, lifting mechanism and the transfer arm mechanism tilt mechanism, and the control system of the table has been described. The test results show that the rotation control error of the dimensional table at all levels are less than 0.05°. The mesa composed of inclinometer, op- tical encoder and stepper motor, whose horizontal control error is within ±10＇. The above errors that can meet the de- sign requirements.

关 键 词：太阳辐射计量仪表 检定 多维工作台 太阳模拟器 

分 类 号：V524.2[航空宇航科学与技术—人机与环境工程]