金属射流欧姆加热效应的影响因素分析  

Analysis of Influence Factors of Ohmic Heating Action on the Shaped Charge Jet

作　　者：卢聘[1] 李治源[1] 向红军[1] 陈少辉[2] 

机构地区：[1]军械工程学院弹药工程系,河北石家庄050003 [2]北京航空工程技术研究中心,北京100076

出　　处：《军械工程学院学报》2013年第5期30-34,共5页Journal of Ordnance Engineering College

基　　金：国家自然科学基金资助项目(51307182)

摘　　要：为探究影响金属射流欧姆加热效应的因素,在被动电磁装甲系统等效电路模型的基础上,根据虚拟源点理论建立金属射流的作用时间模型,进一步明确金属射流在侵彻被动电磁装甲过程中每部分射流微元的作用时间;结合金属射流的比作用量模型,利用Matlab软件对金属射流的电流和比作用量波形随被动电磁装甲系统的电感、电容、电阻和充电电压的变化规律进行数值分析.仿真结果表明:随着系统电感的减小、电阻的减小、电容的增大和充电电压的增大,金属射流比作用量的峰值增大,有利于射流发生电爆炸.In order to explore factors affecting ohmic heating action on jet, according to equivalent circuit model of passive electromagnetic armor system, the mathematical model of the time of pulse current acting on shaped charge jet is established based on the virtual origin concept. The acting time of jet element is further defined in the process of jet penetrating passive electromag- netic armor. Combined with the specific action model,the current waveform and numerical value of specific action variation rules along with passive electromagnetic armor system inductance,ca-pacitance, resistance and the charging voltage are analyzed by Matlab. The results show that when reducing the inductance and resistance or increasing the energy storage capacitance and charging voltage,the peak value of specific action increases,it makes for the jet to occur in electrical explo-sion.

关 键 词：金属射流 被动电磁装甲 作用时间 欧姆加热效应 比作用量 

分 类 号：TJ811[兵器科学与技术—武器系统与运用工程]