渗蜡工艺对快速熔模精铸原型件精度的影响规律  

Effect of Wax Penetration Process on Dimensional Accuracy of PS Prototype in Rapid Investment Casting

作　　者：芦刚[1] 严青松[1] 李康[1] 卢百平[1] 余欢[1] 

机构地区：[1]南昌航空大学轻合金加工科学与技术国防重点学科实验室,江西南昌330063

出　　处：《铸造技术》2013年第12期1679-1681,共3页Foundry Technology

基　　金：国家自然科学基金资助项目(51261025);省教育厅科技项目(GJJ12447)

摘　　要：针对快速熔模精铸PS原型件,渗蜡时间、渗蜡温度和二次渗蜡工艺对原型件尺寸误差E r的影响进行了实验研究。结果表明:一次渗蜡后原型件尺寸变小,当原型件内部气体全部排出时精度较高,平均尺寸误差E r为-0.06%;渗蜡温度低于73℃时尺寸误差E r受渗蜡温度的影响显著,二次渗蜡可以适当提高尺寸精度,二次渗蜡时间为6 min时平均尺寸误差E r为0.02%。The effect of wax penetration time, temperature, secondary wax penetration technical on prototyping dimensional error Er was experimentally researched in rapid investment casting. The results show that the size of PS prototypes becomes smaller after initial wax penetration, the PS prototypes have high accuracy when all intemal gases are exhausted, the average size error Er of prototype is -0.06%; the wax penetration temperature has significant effects on prototype size error when wax penetration temperature is below 73℃, secondary wax penetration can improve the size accuracy of PS prototypes, the average size error is 0.02% when the secondary wax penetration time is 6 min.

关 键 词：快速熔模精铸 渗蜡工艺 选择性激光烧结 PS原型件 

分 类 号：TG249.5[机械工程—精密仪器及机械]