检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:毕建峰[1] 邹念育[1] 高英明[1] 杨轶[1] 曹帆[1] 李浩[1]
机构地区:[1]大连工业大学光子学研究所,辽宁大连116034
出 处:《半导体光电》2013年第6期975-978,共4页Semiconductor Optoelectronics
基 金:国家科技支撑计划课题(2011BAE01B06);大连市科技计划项目(2011A12GX014);辽宁省教育厅教育创新计划项目(辽教发[2010]36号);辽宁省教育科学"十二五"规划立项课题(JG11DB030);2010年辽宁省研究生教育创新计划项目
摘 要:高压LED和交流LED都是通过串联数十颗LED来增大整体导通电压,结构上高压LED是交流LED的一种特殊形式。介绍了高压LED和交流LED的驱动电路模型,其共同点是皆有一个限流电阻与光源串联。通过调整限流电阻的阻值和改变光源所含LED个数与连接形式,分别对高压LED和交流LED的输出特性进行了测量。在两种光源所含LED数量和工作电流均相同的情况下,高压LED的发光效率和光通量要高于交流LED;并联式高压LED的发光效率低于串联式高压LED的发光效率,光通量则相反;验证了交流LED的发光效率与限流电阻无关。Both high voltage LED and AC LED increase their break-over voltage by connecting dozens of LED in series,and high-voltage LED can be considered as a special form of AC LED in structure.Driving circuit models of high-voltage LED and AC LED were introduced,and their similarity is that they both own a current-limiting resistance connected in series with the light source.The output characteristics of high-voltage LED and AC LED were measured by adjusting current-limiting resistor,the number and connecting form of LEDs.It is indicated that with the same LED number and operating current,both the luminous efficiency and luminous flux of high-voltage LED are all higher than that of AC LED,but the luminous efficiency of parallel high-voltage LED is lower than that of the series one,while the luminous efficiency is on the contrary.According to the measurement,it is verified that the luminous efficiency of AC LED is irrelevant for the current-limiting resistance.
分 类 号:TN312.8[电子电信—物理电子学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.15.189.95