基于dsPIC的永磁汽油发电机半控整流技术研究  

Research on dsPIC-based Half-control Rectification for Permanent Magnet Gasoline Generators

作　　者：徐凯[1] 何卫彬[1] 陈毅光[1] 

机构地区：[1]中国船舶重工集团公司第七一五研究所,浙江杭州310012

出　　处：《电气自动化》2013年第6期34-36,共3页Electrical Automation

摘　　要：利用数字信号控制器设计一种永磁汽油发电机输出电压整流的全数字控制系统,具体讨论了基于dsPIC30F2010的数字触发软件设计。通过软件编程,控制器产生触发信号,简化了原来复杂的移相触发电路。试验结果表明,利用这种方法设计的整流电路能适应宽压和宽频输入,输出电压稳定,并能在负载切换时动态响应迅速。A digital signal controller is used to design a permanent magnet gasoline generator to give rectified voltage output. This paper discusses the design of digital triggering software based on dsPIC30F2010. The complex phase shift trigger circuit is simplified through programming so that the controller can generate triggering signal. The experimental results show that the rectifying circuitry designed in the this method can be adapted to the input of wide ranges of voltage and frequency,guarantee a steady output voltage,and give a quick dynamic response at changeover of loads.

关 键 词：整流稳压 永磁汽油发电机 移相触发 数字信号控制器 动态响应 

分 类 号：TM461[电气工程—电器]