相容剂SEBS-g-MAH对回收HIPS、ABS的共混物流变性能的影响  

Effect of Compatibilizer SEBS-g-MAH on Rheological Property for the Blends of Recycled HIPS and ABS

作　　者：乔冰[1] 杜素果 马星慧[1] 李迎春[1] 

机构地区：[1]中北大学材料科学与工程学院,山西太原030051 [2]河北亚大汽车塑料制品有限公司,河北涿州072750

出　　处：《塑料科技》2014年第1期83-87,共5页Plastics Science and Technology

摘　　要：以苯乙烯-乙烯-丁烯-苯乙烯嵌段共聚物接枝马来酸酐(SEBS-g-MAH)为相容剂制备了回收高冲击强度聚苯乙烯(HIPS)和丙烯腈-丁二烯-苯乙烯共聚物(ABS)的共混物。利用熔体质量流动速率试验机和毛细管流变仪分析研究了该HIPS/ABS/SEBS-g-MAH共混物的流变行为。结果表明:在测试温度、应力条件下,该HIPS/ABS/SEBS-g-MAH共混物均为假塑性流体;随着相容剂SEBS-g-MAH用量的增加,共混物的非牛顿指数和黏流活化能均先增大后减小,且在相容剂SEBS-g-MAH用量为15 phr时达到最大值。Blends of recycled high impact polystyrene （HIPS） and acrylonitrile-butadiene-styrene terpolymer （ABS） were prepared with maleic anhydride grafted styrene-ethylene-butadiene- styrene （SEBS-g-MAH） as the compatibilizer. The rheological property of the HIPS/ABS/SEBS- g-MAH blends was measured and analysed by means of melt flow rate testing machine and capillary rheometer. The results show that the HIPS/ABS/SEBS-g-MAH blends are pseudoplastic fluids under the test temperature and stress. The non-Newtonian and flow activiation energy first increases and then decreases with the increasing SEBS-g-MAH content, and reach the maximum value when the SEBS-g-MAH content is 15 phr.

关 键 词：高冲击强度聚苯乙烯 丙烯腈/丁二烯/苯乙烯共聚物 苯乙烯-乙烯-丁烯-苯乙烯嵌段共聚物接枝马来酸酐 流变性能 

分 类 号：TQ320.1[化学工程—合成树脂塑料工业]