混合导体氧化物SrFeCo_(0.5)O_y粉末的微波合成与表征  

MICROWAVE SYNTHESIS AND CHARACTERIZATION OF MIXED CONDUCTOR OXIDE SrFeCo_(0.5)O_y POWDER

作　　者：霍地[1] 张劲松[1] 杨永进[1] 曹小明[1] 徐志军[1] 杨洪才 

机构地区：[1]中国科学院金属研究所 [2]东北大学

出　　处：《材料研究学报》2000年第5期505-508,共4页Chinese Journal of Materials Research

基　　金：国家九五攻关项目!960544.

摘　　要：采用微波加热方法与常规高温固相法合成Ｓｒ－Ｆｅ－Ｃｏ－Ｏ系混合导体陶瓷氧化物粉末．利用ＸＲＤ，ＴＥＭ／ＥＤＸ及ＳＥＭ等测试方法分析与表征粉体用微波加热合成的粉体颗粒尺寸分布均匀，一次颗粒尺寸较小，结晶度也好于用常规加热合成的粉体．微波加热合成粉体的结晶相结构是钙钛矿结构 Ｓｒ（Ｆｅ， Ｃｏ）１．５Ｏ＿ｙ相，并有少量的正交结构相和尖晶石（Ｃｏ， Ｆｅ）３Ｏ４相；高温固相法合成粉末由Ｓｒ４（Ｆｅ， ＣＯ）６Ｏ１３　相及少量的 Ｓｒ（Ｆｅ１－ｘＣｏｘ）Ｏ３　相和 ＣｏＯ相组成．Mixed--conducting ceramic oxide of Sr-Fe-Co-O system were prepared by microwave heating and high temperature solid state reaction method in atmosphere, the powders were analyzed and characterized by powder X-ray diffraction, transmission electron microscopy coupled with EDX and scanning electron microscopy. The particle size distribution of the powder prepared by micromave heating is homogeneous, primary particle size is smaller, and crystallization is better than that prepared by solid state reaction method. The phases component of powders prepared by microwave heating are perovskite Sr(Fe,Co)1.5Oy, along with a little amount of orthorhombic Structure phase and spinel (Co,Fe)3O4. phase. A predominant orthorhombic phase Sr4Fe6-xCoxO13+ with a perovskite phase SrFe1-xCoxO3-- , and a face--centered Cubic phase CoO were observed in solid state reaction sample,

关 键 词：无机合成 微波加热 Sr-Fe-Co-O混合导体氧化物 

分 类 号：TQ174.758[化学工程—陶瓷工业]