汽车制动盘形位公差数字化检测仪开发  

Development of automobile brake disc tolerance digital detection equipment

作　　者：邢毅飞 姜风国[2] 朱彬[2] 

机构地区：[1]烟台大学工程实训中心,烟台264005 [2]烟台大学机电汽车工程学院,烟台264005

出　　处：《现代制造工程》2014年第1期88-91,共4页Modern Manufacturing Engineering

基　　金：山东省自然科学基金资助项目(ZR2011EL012);山东省科技发展计划项目(2012GGD06008);山东省高等学校科研计划项目(J11LD26)

摘　　要：通过对国内汽车制动盘形位公差检测要求的分析,提出了一种针对汽车制动盘形位公差数字化检测仪的研究方案。从机械方案设计、电气控制方案设计和软件系统方案开发三方面进行了深入的研究。实现了制动盘形位公差指标的数字化检测功能。该检测仪的研制有助于减少以往由于检测方式落后造成的制动盘产品缺陷问题。After analysis of testing requirement about the domestic automobile brake disc shape position tolerance, one of solutions was put forward with the digital testing equipment for automobile brake disc. Deep studying from the mechanical design scheme, electrical control scheme and the software system scheme was carried. The digital detection function about the measured indexes was realized. With the development of this device, the defect caused by traditional detection means could be reduced greatly.

关 键 词：制动盘 公差 检测 开发 

分 类 号：TH112.1[机械工程—机械设计及理论]