34GHz TE_(01)模基波回旋速调管高频系统设计与实验  

Design and experiment of high frequency circuit:fundamental wave gyroklystron amplifier with 34 GHz TE_(01) mode

作　　者：徐勇[1] 罗勇[1] 王建勋[1] 王丽[1] 蒲友雷[1] 李宏福[1] 

机构地区：[1]电子科技大学物理电子学院,四川成都610054

出　　处：《红外与毫米波学报》2013年第6期531-537,共7页Journal of Infrared and Millimeter Waves

基　　金：国家自然科学基金(61101040)~~

摘　　要：利用场匹配理论,建立了具有突变结构谐振腔的级联散射矩阵.通过数值计算,完成了Ka波段TE01模回旋速调管的输入腔、群聚腔、输出腔的设计与制作.同时给出了一支Ka波段TE01模四腔基波回旋速调管高频系统和整管的优化设计方案.PIC模拟表明:在中心频率34 GHz、注电压70 kV、注电流11 A的情况下,获得了输出功率390kW,饱和增益42.9 dB,电子效率50.6%,3 dB输出带宽360 MHz的结果.通过样管的热测实验显示在34 GHz,注电压70 kV,注电流11 A,获得了301 kW的稳定输出脉冲峰值功率,41.8 dB的增益,39.1%的效率,285 MHz的3dB输出带宽.The scattering matrix for the cavity with abrupt changes in radius in the gyroklystron was built with the mode- matching technique. The cavities for input, bunching and output of the Ka-band TEo1 mode in the gyroklystron have been designed and fabricated. The designed amplifier, as indicated by the PIC simulation, was expected to produce 390 kW peak output power, saturated gains of 42.9 dB and 50.6% efficiency at center frequency 34 GHz and 70kV, 11A annular electron beam. The full width half maximum （FWHM） bandwidth is greater than 360 MHz. The hot test shows that the fabricated gyroklystron amplifier has actually produced 301 kW peak output power, 39.1% efficiency and saturated gains of 41.8 dB at center frequency 34 GHz and 70 kV , 11 A annular electron beam . The full width half maximum （FWHM） bandwidth is greater than 285 MHz.

关 键 词：回旋速调管 注-波互作用 高功率毫米波 

分 类 号：TN722[电子电信—电路与系统] TN129