乙醇圆柱射流雾化破碎过程的PIV试验研究  

Study on Ethanol Cylindrical Spray Process and Breakup with PIV Measurements

作　　者：姚春德[1] 侯亚帮[1] 贾丽冬[1,2] 刘军恒[1] 魏立江[1] 

机构地区：[1]天津大学内燃机燃烧学国家重点实验室,天津300072 [2]洛阳理工学院,洛阳471023

出　　处：《中国机械工程》2014年第3期285-290,共6页China Mechanical Engineering

基　　金：国家自然科学基金资助项目(51176135)

摘　　要：在喷雾容弹上利用PIV激光测试系统,研究了容弹背压、容弹温度和喷射脉宽对乙醇圆柱射流破碎雾化的影响。试验结果表明:容弹背压升高,乙醇圆柱射流贯穿距离减小,射流锥角变大;温度由20℃变为60℃时,乙醇运动黏度变小,射流贯穿距离增大,射流锥角略有增加;喷射脉宽的改变对乙醇圆柱射流贯穿距离和射流锥角影响很小,然而大脉宽的乙醇射流雾化困难。The ethanol cylindrical spray process was studied experimentally using PIV in a constant volume vessel. The effects of ambient pressure, ambient temperature and injection pulse width on the ethanol cylindrical spray process were examined. Experimental results show that with increasing ambient pressure, the cylindrical spray penetration length decreases, the spray dispersion angle increases; with temperature rises from 20℃ to 60℃, ethanol kinetic viscosity decreases, the spray penetration length increases, the spray dispersion angle increases slightly. The effects of changing injection pulse width on the cylindrical spray penetration length and cylindrical spray dispersion angle are not noticeable, however the larger injection pulse width makes the cylindrical spray atomization more incomplete.

关 键 词：乙醇 圆柱射流 雾化 PIV 

分 类 号：TK464[动力工程及工程热物理—动力机械及工程]