高功率光纤放大器中模式不稳定阈值功率的理论研究  

Theoretical Study of the Threshold Power of Mode Instability in High-Power Fiber Amplifiers

作　　者：陶汝茂[1] 王小林[1] 肖虎[1] 周朴[1] 刘泽金[1] 

机构地区：[1]国防科学技术大学光电科学与工程学院,湖南长沙410073

出　　处：《光学学报》2014年第1期134-139,共6页Acta Optica Sinica

基　　金：国家自然科学基金(11274386)

摘　　要：模式不稳定指高功率光纤激光随着输出功率提升发生的模式突变，会导致光束质量下降。基于模式耦合模型，对量子噪声、强度噪声等引起的高功率光纤激光模式不稳定出现的阈值功率进行了详细分析和计算。研究结果表明，采用级联抽运方案和部分掺杂方式可以使模式不稳定性出现的阈值功率提高2～5倍。增加初始注入信号光功率、抑制注入信号激光的强度噪声和高阶模成分也可以提高阈值功率。研究结果为高功率光纤激光系统的设计提供一定参考。Mode instability refers to an abruptly mode change when the average output power increases above certain threshold power, which results in degrading of beam quality. Based on the mode-coupled model, the threshold power of onset mode instability, which is induced by quantum noise seeding or intensity noise seeding, is investigated and analyzed in detail. Analysis results show that the threshold power can be improved by 2--5 times for adopting tandem pumping technology and partially doping technology. Increasing the initial signal laser power, suppressing the intensity noise of the signal laser and reducing the power launched into the high order mode can also improve the threshold power. The investigation provides a reference to the design of high-power fiber laser systems.

关 键 词：激光光学 模式不稳定 高功率光纤放大器 级联抽运 部分掺杂 

分 类 号：TN248.1[电子电信—物理电子学]