检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:郭玉良[1] 陈声宗[1] 张竞[1] 李文生[1] 叶姣[1]
出 处:《精细化工》2000年第12期738-740,共3页Fine Chemicals
摘 要:采用过量的丁二酸二甲酯作为反应溶剂 ,以甲醇钠与丁二酸二甲酯合成 2 ,5 二氧 1,4 环己烷二甲酸二甲酯的合成工艺 ,研究了原料配比、反应温度及反应时间对产品收率的影响。在n(丁二酸二甲酯 )∶n(甲醇钠 ) =4 3∶1 0、反应温度 10 0℃及回流反应时间 2 5~ 30min的最佳合成工艺条件下 ,得到质量分数为 97 5 %的 2 ,5 二氧 1,4 环己烷二甲酸二甲酯 ,以甲醇钠计其收率为 88 1%。The process for synthesis of 2,5 dioxo 1,4 cyclohexanedicarboxylic acid dimethyl ester was carried out by reacting sodium methylate with dimethyl succinate in the presence of excess dimethyl succinate used as reaction solvent.The effects of raw material ratio,reaction temperature and reaction time on the yield of the product were studied.Under the optimized process conditions molar ratio of dimethyl succinate to sodium methylate=4 3∶1 0,reaction temperature 100 ℃ and reflux time 25-30 min,2,5 dioxo 1,4 cyclohexanedicarboxylic acid dimethyl ester of high purity(≥97 5%) was obtained in a high yield of 88 1% based on sodium methylate.
关 键 词:二氧环己烷二甲酸二甲酯 丁二酰丁二甲酯 丁二酸二甲酯 合成工艺
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.192