基于特征识别的型腔零件数控自动编程系统的研究  

The Automatic NC Programming System of Cavity Parts Based on Process Feather Recognition

作　　者：左晓娟[1] 王华昌[1] 李建军[1] 

机构地区：[1]华中科技大学材料成型与模具技术国家重点实验室,湖北武汉430074

出　　处：《模具制造》2014年第2期69-74,共6页Die & Mould Manufacture

摘　　要：型腔零件的数控编程工艺比较复杂,一般情况下是通过人机交互完成的,编程效率不高。本文通过分析型腔零件的几何工艺特征,对零件建立属性邻接图,利用子图匹配局部工艺特征,并结合相关参数选择规范完成对加工操作的加工对象和操作参数的设置,同时利用标准化的工艺模板,实现加工工艺与加工顺序的自动匹配,最终自动完成零件的数控编程。The NC programming process of cavity parts is much more complex than mat of other parts. Normally, it is done through human-computer interaction, but the programming efficiency is not high. This paper proposes the automatic NC programming system of cavity parts based on AAG. The AAG is got by analysing the geometric process characteristics of parts. It is changed into different subgraphes according to partial process characteristics. These subgraphes complete the settings of processing objects and parameters of machining operations with relevant parameter selection norms. While using the standardized process template, the system finally matches the processing technology and processing sequence automatically.

关 键 词：数控自动编程 工艺模板 属性邻接图 

分 类 号：TG659[金属学及工艺—金属切削加工及机床] TP391.7[自动化与计算机技术—计算机应用技术]