一族有源钳位正激变换器  

A Family of Active Clamp Forward Converters

作　　者：胡海兵[1] 吴红飞[1] 刘薇[1] 邢岩[1] 

机构地区：[1]南京航空航天大学江苏省新能源发电与电能变换重点实验室,南京210016

出　　处：《电工技术学报》2013年第12期245-250,261,共7页Transactions of China Electrotechnical Society

基　　金：国家自然科学基金(51177070;51077071);江苏省新能源发电与电能变换重点实验室开放基金;江苏省自然科学基金(BK2012794)资助项目

摘　　要：研究有源钳位正激变换器拓扑族,提出了有源钳位正激变换器的三种开关单元:有源钳位正激正单元、有源钳位正激负单元和有源钳位正激复合单元。开关单元中的开关管、有源钳位支路和变压器共同构成正激变换器的主功率传输(变压器励磁)和变压器磁复位支路,在满足变压器励磁和磁复位所要求的电位条件下,通过单个有源钳位正激单元或者多个正激单元的串并联组合,得到了已有的有源钳位正激变换器拓扑和一系列新型拓扑。以其中一个拓扑为例,详细分析了变换器工作原理并进行了实验验证。A family of active-clamp forward converter topologies is proposed. Three active clamp switching cells, named as active-clamp forward positive cell, active-clamp forward negative cell and active-clamp forward combined cell, are categorized for the active-clamp forward converters. All the switching ceils are composed of active switch, active-clamp branch and transformer. The power transmission and transformer-demagnetizing paths are built using the active clamp switching cells. Based on the proposed active clamp switching cells and related methodology, a family of active clamp forward converters, which covers exiting topologies and proposed ones, is derived. One of the proposed topologies, as a typical example, is analyzed and verified through experiments.

关 键 词：正激变换器 拓扑 有源钳位 开关单元 

分 类 号：TM461[电气工程—电器]