Investigation of Hydroabrasion in Slurry Pipeline Elbows and T-junctions  

作　　者：Mehdi Azimian Hans-JOrg Bart 

机构地区：[1]Chair of Separation Science and Technology, University of Kaiserslautern, Kaiserslautern D-67663, Germany

出　　处：《Journal of Energy and Power Engineering》2014年第1期65-78,共14页能源与动力工程（美国大卫英文）

摘　　要：The present study demonstrates the comparison of erosion rate of critical pipeline parts, namely elbow and T-junction which face the maximum erosion in a pipeline and may cause an early damage and failure of the system. CFD （computational fluid dynamics） with an Eulerian-Lagrangian approach coupled with an approved erosion model is applied to visualize the 3-D flow behavior of slurry flow in both parts and to predict the erosion rate and the location of erosion at the internal surfaces. The analysis of slurry erosion is performed in five steps; geometry and grid generation, grid study/refinement, fluid flow solution, solid particles tracking and finally, the erosion calculation. In previous publications in literature considering transportation of gas-solid flows in pipe parts, the application ofT-junctions instead of elbows for specified conditions in order to reduce the erosion is recommended. In this article, it is approved that for liquid-solid flows, the Stokes number is reasonably smaller than the values for gas-solid flows. This causes the solid particles tightly couple to the fluid phase and to travel more closely with the fluid streamlines. The effects of important influencing parameters such as feed flow velocity, solid concentration, particle size and shape are investigated in detail in current work. It was found that for liquid-solid flows, the erosion of T-junction for all of the mentioned influencing parameters, due to its geometrical specifications and Stokes number variation in comparison with gas-solid flows, is reasonably higher than erosion of elbow. Due to these findings, in contrary to the gas-solid mixture flows, application of T-junction instead of elbow for liquid-solid flow transportation is not recommended.

关 键 词：CFD liquid-solid mixture flow elbow and T-junction erosion rate. 

分 类 号：TQ177.26[化学工程—硅酸盐工业] U471.11[机械工程—车辆工程]