Fenton-接触厌氧-载体悬浮床工艺处理合成制药废水  

Treatment of synthetic pharmacy wastewater by Fenton-contact anaerobic-carrier suspension bed process

作　　者：李家祥 江葱 蒙钟代 范跃华 

机构地区：[1]南京绿岛环境工程有限公司,南京210046

出　　处：《工业水处理》2014年第2期81-83,共3页Industrial Water Treatment

摘　　要：合成制药废水成分复杂、COD高、难生物降解,采用调节-Fenton氧化-厌氧-好氧工艺对其进行了中试处理研究,取得了设计参数,并进行了工程优化设计。调试运行结果表明,该工艺可使处理出水达到《污水综合排放标准》(GB 8978—1996)的三级标准要求。Synthetic pharmacy wastewater are characterized by complex components, high COD concentration and difficult biodegradation. Pilot-scale study has been carried out by the combination of adjustment-Fenton-anaerobic-aerobic process, through which parameters are obtained and project design is optimized. Debugging operation shows that the treated effluent water quality can meet the requirements of the third class of Integrated Wastewater Dis-charze Standard（GB 8978-1996）.

关 键 词：合成制药废水 FENTON试剂 接触厌氧 载体悬浮床 

分 类 号：X703[环境科学与工程—环境工程]