检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:苟绍华[1,2] 杨成[2] 叶仲斌[1,2] 尹婷[2] 周利华[2] 夏鸿[2]
机构地区:[1]西南石油大学油气藏地质及开发工程国家重点实验室,四川成都610500 [2]西南石油大学化学化工学院,四川成都610500
出 处:《化学研究与应用》2014年第2期180-186,共7页Chemical Research and Application
基 金:四川省科技支撑计划项目(2012FZ0130)资助;国家自然科学基金项目(51274172)资助
摘 要:以丙烯酰胺(AM)、丙烯酸(AA)、(1-二甲氨基)-烯丙基磷酸(DMAAPA)和N-烯丙基油酰胺(CON)为原料,制备了一种水溶性磷酸盐共聚物AM/AA/DMAAPA/CON。确定了最佳合成条件:AM:AA:DMAAPA:CON=69.6:30.0:0.2:0.2(wt%)、pH=7、引发剂加量为0.2 wt%、单体浓度20 wt%、聚合反应温度40℃。对共聚物进行了IR和NMR表征。该聚合物表现出较好的增粘性、抗剪切、耐温和耐盐性能;0.8 wt%的共聚物溶液防膨率达到80.12%,与1.0 wt%的KCl复配后,防膨率达到96.54%。A tetra-copolymer of AM/AA/DMAAPA/CON was synthesized using acrylamide (AM),acrylic acid(AA),(1-dimethyl-amino)-allyl phosphoric acid(DMAAPA)and N-allyl base oil amides(CON)as raw materials.The optimum synthetic condition was determined as follows:AM∶AA∶DMAAPA∶CON=69.6∶30.0∶0.2∶0.2(wt%),the appropriate pH was 7,initiator was found to be 0.2 wt%,concentration of monomers was 20 wt%and the temperature was 45℃.The structure of copolymer was confirmed by the results of FT-IR and NMR analysis.The copolymer showed good tackifying ,shear-resistant,temperature-tolerance and salt-resist-ant.The anti-swelling rate was found to be 80.12%for the copolymer in 0.8 wt%solution.When mixed with KCl(1.0 wt%),the anti-swelling rate reached 96.54%.
关 键 词:(1-二甲氨基)-烯丙基磷酸 N-烯丙基油酰胺 增粘 耐温 粘土稳定剂
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.147