FA317型并条机机械波的成因与处理  

The Cause Resulting in Mechanical Waves with the Draw Frame FA317

作　　者：贺梅 

机构地区：[1]陕西八方纺织有限责任公司,陕西咸阳712000

出　　处：《纺织器材》2014年第1期46-48,共3页Textile Accessories

摘　　要：为了提高产品质量,消除机械波,分析了机械波的形态特征及FA317型并条机棉条波谱图上13cm^15cm、78cm^80cm处机械波产生的原因,根据机械波特征更换了齿形带及前胶辊等器材后机械波得以消除,并明显改善并条条干CV值,提出了并条机机械波预防措施。指出:并粗工序机械波的控制和稳定对后工序乃至布面质量影响很大,实际生产中出现的机械波比较复杂,应具体问题具体分析,并做好设备管理工作。In order to eliminate the mechanical waves for better product quality,analysis is done to the mechanical configuration and the cause resulting in mechanical waves at points of 13 cm 15 cm, 78 cm-80 cm. The mechanical waves disappeared when the toothed belt and the front roller are changed in conformity with the feature of the mechanical waves with marked im- provement of the mass CV value. Conclusion is made that controlling and stablizing the me- chanical waves in the drawing process is important to the subsequent process and the fabric quality. The mechanical waves in the real production results from complicated different causes. It is necessary to do equipment management according to the real situation.

关 键 词：并条机 机械波 波谱图 齿形带 胶辊 条干CV值 控制措施 润滑 

分 类 号：TS103[轻工技术与工程—纺织工程]