基于ARM的罐道间距数据采集检测系统的设计  

Design of Channel Spacing Data Collecting Inspection System Based on ARM

作　　者：李大凯[1] 韩雪锋[1] 于佑飞[1] 陈鹏[1] 

机构地区：[1]山东科技大学信息与电气工程学院,山东青岛266590

出　　处：《煤矿机电》2014年第1期9-11,16,共4页Colliery Mechanical & Electrical Technology

摘　　要：罐道是矿井提升系统的重要组成部分,针对罐道的变形测一直没有很好的方法,设计一种基于ARM的罐道间距数据采集检测系统。该系统通过轴编码器和测距位移传感器测得罐道的纵向距离和横向距离,然后通过S3C2440内置的LCD控制器控制一块3.5英寸、分辨率为240×320的TFT真彩液晶屏,以便实时显示测量结果,使操作人员及时了解情况,保障生产安全。The channel is an important part of mine hoisting system, but there has not been a very good method for guide deformation measurement. Designs a channel spacing data collector inspection system based on ARM. This system can measure the longitudinal and transverse distance of the channel through shaft encoder and distance measuring displacement sensor. And then through LCD controller setted in S3C2440, controls a 3.5 inch TFT true color LED screen of 240 × 320 resolution to display real-time measuring result, for handler to know the situation and ensure safety run of hoisting system.

关 键 词：罐道间距 检测系统 S3C2440核心板 ARM处理器 

分 类 号：TD534.6[矿业工程—矿山机电]