碱式硫酸铝再生法循环吸收SO_2性能的实验研究  

Experimental study on performance of basic aluminum sulfate regeneration cycle of SO_2 absorption

作　　者：高艺[1] 张子敬[1] 温高[1] 孙世昌[1] 

机构地区：[1]内蒙古工业大学能源与动力工程学院,内蒙古呼和浩特010051

出　　处：《热力发电》2014年第2期47-50,共4页Thermal Power Generation

基　　金：内蒙古工业大学重点基金项目(ZD201114);内蒙古自治区高等学校科学研究项目(NJZY13118)

摘　　要：于五口烧瓶中研究了设计铝量30g／L、碱度30％的碱式硫酸铝溶液在5次循环吸收解吸实验内，溶液中SO2/4-、SO2/3-浓度、pH值以及吸收率随循环吸收次数的变化规律，同时探讨了碱式硫酸铝再生法循环吸收SO2的影响因素。研究结果表明，在反应最初的i0S内，经过5次循环实验，碱式硫酸铝对SO2的短时吸收率仍大于95％。SO2吸收率随吸收液SO/2/3-、SO2/4-初始浓度的增大而减小，随着pH值的升高而增大，当SO2/3-、SO2/4-初始浓度、pH值分别在0～0．023mol／L、0．60～0．67mol／L、3．51～3．62的范围内时，吸收率可维持在95％以上。Five cycles of SOz absorption and desorption experiments were performed, using basic a- luminum sulfate solution with design aluminum content and alkalinity of 30 g/L and 30 % respec- tively. The variations of such parameters as S042- concentration, S032- concentration, pH value and absorption rate of basic aluminum sulfate solution against the absorption cycle frequency were investigated. Moreover, factors affecting the SO2 cyclic absorption performance using basic alumi- num sulfate regeneration method were discussed. The results show that,within the initial ten sec- onds, after five cycles ＇ absorption, the short-time absorption rate of basic aluminum sulfate to SOz was still able to achieve more than 950/60. The absorption rate decreased with an increase in initial concentration of S032- and S042- ,and increased with the pH value. When the initial concentra- tion of S032- and SO42- ,and the pH value was within range of 0-0. 023 mol/L,0. 60-0. 67 mol/L, and 3.51-3.62,respectively,the absorption rate can maintain at 95% or higher.

关 键 词：碱式硫酸铝 脱硫 循环次数 离子浓度 PH值 

分 类 号：X511[环境科学与工程—环境工程]