不含PFOS氟硅苯丙乳液实验研究  

Experimental research on poly(styrene-acrylate)not containing fluorosilicone emulsion

作　　者：路国红[1] 胡晓熙[2] 王丽[1] 龚莹[1] 易昌凤[1] 

机构地区：[1]湖北大学材料科学与工程学院,湖北武汉430062 [2]钦州学院化学化工学院,广西钦州535000

出　　处：《实验技术与管理》2014年第2期50-52,共3页Experimental Technology and Management

基　　金：湖北省创新群体基金资助项目(2010CDA077)

摘　　要：将该实验室自制的改性硅溶胶与苯乙烯、丙烯酸丁酯、甲基丙烯酸羟乙酯、甲基丙烯酸十二氟庚酯等单体通过乳液聚合,制备不含PFOS(全氟辛基磺酰化合物)的氟硅苯丙共聚物乳液。利用FTIR表征共聚物的组成,采用TEM研究乳胶粒的形貌,用接触角分析仪等对聚合物乳胶膜的性能进行表征。结果表明,乳胶粒有明显的核壳结构,不含PFOS氟硅苯丙共聚物乳胶膜吸水率为12.50%,对水的接触角达到93.5°。In the presence of an anionic and a nonionic emulsifier , the poly （styrene-acrylate ）not containing fluorosilicone emulsion was prepared by emulsion polymerization ,by using modified silica sol ,styrene （St） , butyl acrylate （BA ） , ethylene glycol methacrylate （HEMA ） , dodecafluoroheptyl methacrylate （FA ） as monomers .The copolymer structures are characterized by FTIR .The morphology of the copolymer latexes are researched by TEM .Contact angle analysis is used to test the performance of the emulsion film .The results show that the morphology of poly （styrene-acrylate）not containing fluorosilicone emulsion particles has obvious core-shell structure ;the water absorption of the poly （styrene-acrylate） containing fluorosilicone emulsion film is 12 .50% and the contact angle of the film is 93 .5＆#176;;the poly（styrene-acrylate）not containing fluorosilicone emulsion film has good solvent resistance not only in polar aprotic solvents but also in some low boiling-point solvents such as T HF .

关 键 词：含氟共聚物乳液 含硅共聚物乳液 苯丙乳液 核壳结构 乳液性能 

分 类 号：TQ630.4[化学工程—精细化工]