100 Nm/2绢丝/羊绒精纺纱生产实践  

Practice of spinning 100 Nm/2 spun silk/cashmere worsted yarn

作　　者：周效田 陆卫国 

机构地区：[1]浙江新澳纺织股份有限公司,浙江桐乡314511

出　　处：《毛纺科技》2014年第3期16-18,共3页Wool Textile Journal

摘　　要：针对天然纤维中高档纤维羊绒和绢丝的特点,确定原料选择及参数。根据绢丝和羊绒加工生产容易出现的问题,提出有针对性的生产加工解决方案,为加工高比例丝羊绒产品提供加工思路。加工过程重点是原料、和毛油、工艺路线的选择。工艺要求采取小牵伸、少并合、轻重量的原则,加油后要求闷放8 h后再进行后道加工生产,车间环境要求前纺应保持较高的、稳定的相对湿度,后纺环境中纱条处于放湿状态。It is difficult to spin high percentage of silk blend with cashmere yarns. Considering the characteristics of cashmere fiber and silk, this article tells us how to solve the problems during processing such kinds of yarn. The key points are the right choice of material, lubricant oil and processing parameters. It takes smaller drafting times, less blending, lighter weight of slivers. After adding lubricant oil, the fiber has been rested for more than 8 hours for further processing. The higher and stable humidity in pre-spinning and lower humidity after-spinning is also adopted.

关 键 词：绢丝 羊绒 静电 毛粒 条干 

分 类 号：TS104[轻工技术与工程—纺织工程]