钛合金大进给铣削数控加工程序优化及应用  

NC Program Optimization and Application in High Feed Milling Titanium Alloys

作　　者：陈清良[1,2] 何宁[1] 李亮[1] 赵威[1] 史琦[1] 

机构地区：[1]南京航空航天大学机电工程学院,江苏南京210016 [2]成都飞机工业(集团)公司制造工程部,四川成都610091

出　　处：《机械制造与自动化》2014年第1期47-51,共5页Machine Building & Automation

基　　金：国家科技重大专项(2012ZX04003021);技术基础科研项目(C152012C002)资助

摘　　要：钛合金因其优越的比强度、机械性能和抗腐蚀性等优点而广泛应用于航空工业,但由于热导率低、弹性模量小、化学活性高等问题而导致其切削加工性差。介绍了大进给铣削技术这种高速高效的钛合金加工方法,分析了大进给数控加工程序编制带来的效率、品质和成本等方面的问题,提出了相应的加工程序优化方案,并在实际产品上进行了验证。Titanium alloys are widely used in aviation industry due to its superior strength-weight ratio,mechanical properties,corrosion resistance and so on,but their machinability is poor,because of their low thermal conductivity,low elastic modulus,high chemical activity and some other properties.This paper briefly introduces the high feed milling with a high speed and high efficient machining technology for titanium alloys and analyzes the machining efficiency,quality and cost which are brought by NC machining programming for high feed milling.According to the problems above,an optimization scheme of machining program is put forward and verified on actual products.

关 键 词：钛合金 高速铣削 大进给 数控程序优化 

分 类 号：TG547[金属学及工艺—金属切削加工及机床]