检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:樊雄[1,2]
机构地区:[1]广西大学,广西南宁530001 [2]广西工业职业技术学院,广西南宁530001
出 处:《铸造技术》2014年第2期247-249,共3页Foundry Technology
基 金:广西省教育厅科研基金资助项目(桂教高教[2011]24号);广西工业职业技术学院科研基金资助项目(2011024JX005)
摘 要:研究了高碳珠光体T8钢在ECAP处理后的显微组织和力学性能。结果表明,利用多道次ECAP温变形能够使高碳珠光体钢组织呈现超微细化效果。复相组织中亚纳米级铁素体相纳米压痕杨氏模量和硬度分别为203 GPa和4.4 GPa。当纳米压痕深度超过100 nm后,杨氏模量对基底效应敏感度较低,而纳米压痕硬度出现较为明显的基底效应。The microstructures and mechanical properties of the high-carbon pearlitic steel T8 after ECAP deformation were investigated. The results show that the microstructures of the steel are ultrafine by multi-pass ECAP warm deformation. The nanoindentation Young’ modulus and hardness of subnano-sized ferrite in duplex microstructure are 203 GPa and 4.4 GPa, respectively. And when the distance from surface is above 100 nm, the sensibility of Young’ modulus to the matrix decreases, but the matrix effect is obvious for nanoindentation hardness.
分 类 号:TG142.21[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222