错流旋转填料床中络合铁法脱除气体中硫化氢  

Hydrogen sulfide removal by iron chelate based method in a cross-flow rotating packed bed

作　　者：朱振峰[1] 刘有智[1] 罗莹[1] 祁贵生[1] 张中哲[1] 

机构地区：[1]中北大学山西省超重力化工工程技术研究中心,山西太原030051

出　　处：《天然气化工—C1化学与化工》2014年第1期77-81,共5页Natural Gas Chemical Industry

基　　金：山西省科技攻关计划项目(工业)(20130321035-02);山西省研究生优秀创新项目(20130520)

摘　　要：以H2S和N2模拟含硫工业气体,以错流旋转填料床为脱硫设备,采用自制的络合铁脱硫液进行脱硫实验。考察了不同配方溶液、气体流量、脱硫液流量、液气比、超重力因子等因素对脱硫率的影响。研究结果表明,配方溶液工作硫容可达4.25g/L;在气液接触时间仅为0.6s的情况下,脱硫率达到94%以上。错流旋转填料床络合铁法脱硫工艺可实现快速、高效脱硫,且脱硫设备体积小、操作弹性大,符合节能减排的发展趋势,有广阔的发展空间。Removal of H2S from the simulated industrial gas consisting of H2S and N2 was carried out in a cross-flow rotating packed bed reactor using several self-made iron chelate desulfurization solutions. The effects of different formula solutions, gas and liquid flow rates, liquid-gas ratio and high gravity factor were investigated in details. The results showed that the work sulfur capacity of the formula desulfurization solution could be up to 4.25g/L with a H2S removal efficiency of more than 94% and a gas-liquid contact time of only 0.6 s. The iron chelate solution cross-flow rotating bed desulphurization process showed a great potential for industrial application due to its advantages of small volume, rapid desulphurization, high desulphurization efficiency, low liquid-gas ratio and good operating flexibility and conforming to the developing trend of energy-saving and emission reduction.

关 键 词：超重力 错流旋转填料床 络合铁 硫化氢 脱硫 

分 类 号：TQ028.1[化学工程]