基于Autoform的汽车冲压件工艺参数正交试验设计  

Design of Automotive Pressed Parts Process Parameters in Orthogonal Test Based on Autoform

作　　者：王屹峰[1] 孙盼盼 刘志军[1] 

机构地区：[1]长城汽车股份有限公司技术中心 [2]河北省汽车工程技术研究中心

出　　处：《汽车工程师》2014年第2期33-35,共3页Automotive Engineer

摘　　要：为缩短制件设计开发时间和优化工艺参数,文章通过Autoform软件对某汽车前围板成型过程进行分析,并采用正交试验方法进行方案设计。通过分析冲压过程工艺参数(冲压速度、凹模圆角、摩擦系数、板料厚度和压边力等)对前围板成型缺陷的影响程度,使用Minitab软件对各参数进行方差分析,得出5因素影响制件开裂大小,它们依次为凹模圆角>板料厚度>压边力>摩擦系数>冲压速度。并用Mintab软件优选方案,得到了最优方案。The analysis of automotive front-wall panel forming process based on Autoform is described in this paper to shorten the development time and to optimize the process parameter, at the same time the scheme is co,npleted by I,sing orthogonal test method. By analyzing the process parameter during tile stamping process（punching velocity, cavity die radius, friction coefficient, sheet thickness anti BHF, etc.） to determine the defect level of the front-wall panel forming, and by analyzing each parameler with Minitab, five factors which ＇affect the pressed parts cracked were given, i. e. cavity die radius〉sheet thickness〉BHF〉 friction coefficient〉punching velocity. The final scheme is obtained with Mintab.

关 键 词：汽车 前围板冲压件 工艺参数 Minitab软件 正交试验设计 Autoform软件 

分 类 号：TG386[金属学及工艺—金属压力加工]