制备工艺对0.95(K_(0.5)Na_(0.5))NbO_3-0.05CaZrO_3基无铅陶瓷压电性能的影响  

Effects of Preparation Process on Piezoelectric Properties of 0.95 （ K0.5 Na0. 5 ） NbO3 - 0.05CaZrO3 Lead--free Ceramics

作　　者：潘永军 王锋会[2] 刘琨 

机构地区：[1]西安金戈磨料磨具有限责任公司,西安710600 [2]西北工业大学工程力学系,西安710072

出　　处：《陶瓷》2014年第3期24-27,共4页Ceramics

摘　　要：采用传统陶瓷工艺制备了0.95(K0.5Na0.5)NbO3-0.05CaZrO3无铅压电陶瓷。研究了烧结温度和极化工艺对陶瓷压电性能的影响。结果表明:随着烧结温度的提高,0.95(K0.5Na0.5)NbO3-0.05CaZrO3陶瓷的体积密度增大,在1170℃时达到最大值,同时d33和kp,在此温度也分别达到他们的最大值210pC/N和0.40。极化工艺对0.95(K0.5Na0.5)NbO3-0.05CaZrO3陶瓷的压电性能有明显的影响,0.95(K0.5Na0.5)NbO3-0.05CaZrO3陶瓷的最佳极化温度是70℃,最佳极化电场是4kV/mm。Lead-free piezoelectric ceramics 0. 95 （K0.5 Na0.5 ）NbO3- 0. 05CaZrO3were prepared by traditional ceramics process. The effect of the sintering temperature and poling conditions on piezoelectric properties of 0.95（K0. 5 Na0.5 ）NbO3 -0.05CaZrO3 ceramics was investigated. Results show that the optimum sintering temperature of 0.95 （K0. 5 Na0. 5 ）NbO3 - 0.05CaZrO3 ceramics is 1 170 ℃. Piezoelectric properties of 0.95 （K0.5 Na0.5 ）NbO3-0.05CaZrO3 ceramics under the opti- mum sintering temperature are piezoelectric constant d33 of 210 pC/N, planar electromechanical coupling factor kp of 0.40. At the same time, the results show that the optimum poling condition for 0.95 （K0. 5 Na0.5 ）NbO3 -0.05CaZrO3 ceramics is poling electric field of 4 kV/mm and poling temperature of 70℃.

关 键 词：无铅压电陶瓷 铌酸钾钠 压电性能 

分 类 号：TM282[一般工业技术—材料科学与工程]