钙碱浓度对磺酸盐共聚物稳定Zn^(2+)性能的影响研究  

Effects of Ca^(2+) Concentration and Alkalinity on the Stability to Zn^(2+) of the Sulphonate Copolymer

作　　者：胡艳华[1] 冯婕[1] 郦和生[1] 

机构地区：[1]中国石化北京化工研究院燕山分院,北京102500

出　　处：《绿色科技》2014年第3期265-267,共3页Journal of Green Science and Technology

摘　　要：通过静态容量瓶法研究了不同钙碱水质条件下,磺酸盐共聚物对Zn2+的稳定性及Zn2+、Ca2+和碱度之间的关系。结果发现:钙碱浓度的变化对磺酸盐共聚物稳定Zn2+的性能影响较大,Ca2+浓度为600～800mg/L是磺酸盐共聚物对Zn2+稳定性的拐点,Ca2+浓度低于600mg/L时,磺酸盐共聚物对Zn2+稳定性较好,此时碱度为主要影响因素,应重点控制水中的碱度;Ca2+浓度高于800mg/L时,磺酸盐共聚物对Zn2+稳定性较差,应该开发高钙条件下专用的稳锌聚合物。By the static flask methodthis article studiesthe stability to Zn2＋ of the sulphonate copolymerin the water quality conditions with the different Ca2＋ concentration and alkalinity. The results show that the effects of Ca2＋ concentration and alkalinity on the stability to Zn2＋ of the sulphonate copolymer are lager. When Ca2＋ concentration is 600mg/L-800mg/L,it is the inflection point of the stability to PO3- - of the sul- phonate copolymer. When Ca2＋ concentration is below 600mg/L,the stability to POS4- of the sulphonate copolymer is better. During this moment,the alkalinity is the maininfluencefactor. We should control the alkalinity inthe circulating cooling watermainly. When Ca2＋ concentration is higher than 800mg/L, the stability to PO4 3- of the sulphonate copolymer is poor. During this moment, the special polymer to PO4 3- under the high--calcium water quality conditions need be developed.

关 键 词：磺酸盐共聚物 CA2+ Zn2+ 碱度 稳定性 

分 类 号：TQ085[化学工程]