陶瓷压强传感器桥路的温度特性测试  

Temperature characteristic of ceramic pressure sensor

作　　者：杨晓锋 杨介信[2] 

机构地区：[1]上海信耀电子有限公司,上海201821 [2]华东师范大学物理系,上海200062

出　　处：《物理实验》2014年第3期36-39,共4页Physics Experimentation

摘　　要：陶瓷压强传感器的输出不仅与外加的压强有关,还与传感器本身的温度有关.温度使惠斯通电桥的桥臂电阻发生变化,由于桥臂电阻与陶瓷片烧结粘合在一起,当陶瓷片受压形变时产生电阻的应变,造成电桥输出电压的变化;当烧结粘合在一起的桥臂电阻和陶瓷片随本身的温度发生变化也会使电桥输出电压发生变化.本文对实验进行了定量地测量,得出了温度对电桥输出电压的影响,建立了修正的数学模型.T he output of ceramic pressure sensor is related not only to the additional pressure ,but also to the temperature of the sensor itself .The drift of the temperature of Wheatstone bridge will change the resistance of the bridge arm resistors .Because the ceramic chip and bridge arm resistor are sintered and glued together ,the output voltage of the bridge will be affected by the temperature of the bridge and the compression of ceramic chip ,the later will lead to strain in the arm resistor .There-fore ,how to quantitatively measure and obtain the influence of temperature on the bridge output volt-age to establish a mathematical model of correction was discussed in this article .

关 键 词：压电陶瓷 惠斯通电桥 温度 

分 类 号：TM282[一般工业技术—材料科学与工程] O441.1[电气工程—电工理论与新技术]