检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]天津大学化工学院,天津300072 [2]山东潍坊科麦化工有限公司,山东潍坊262700
出 处:《化学工业与工程》2014年第2期18-23,共6页Chemical Industry and Engineering
摘 要:对两步法合成己二酸二酰肼(ADH)的工艺条件进行了研究。首先采用己二酸和甲醇酯化反应合成了己二酸二甲酯,然后将己二酸二甲酯与水合肼酰肼化,得到了高纯度己二酸二酰肼,并确定了适宜的工艺条件:对于酯化反应,催化剂为KHSO4,用量为己二酸质量数的5.5%,n(醇)/n(酸)为4.0,反应时间1.0 h,在该条件下,产品己二酸二甲酯质量分数高达99.8%,收率为77%;对于酰肼化反应,n(肼)/n(酯)、n(醇)/n(酯)比均为4.0,反应时间为1.5 h,此条件下,ADH收率达99%,质量分数高达99.5%。The synthesis of adipic acid dihydrazide by two steps was investigated in this paper. Adipic acid was first esterified with methanol under the catalysis of KHSOa to give dimethyl adipate, which was further reacted with hydrazine hydrate to produce adipic acid dihydrazide (ADH) with a high purity. The optimal conditions for the esterification reaction were determined as catalyst amount was 5.5% of the weight amount of adipic Under these conditions, For nol acid the hydrazide reactio acid, molar ratio of methanol to adipic acid was 4.0, the purity of dimethyl adipate was as high as 99.8% n, the optimal conditions were : molar ratio of both hyd to dimethyl adipate was 4.0, reaction time was 1.5 h. Under these condi dihydrazide reached 99% and the purity was 99.5%. reaction and the razine hy tions, th time was 1.0 h. yield was 77%. drate and metha- e yield of adipic
关 键 词:己二酸二酰肼(ADH) 己二酸二甲酯 己二酸 水合肼 甲醇
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.81