激光陀螺信号解调中自适应滤波器的设计  

Design of Adaptive Filter Based on Laser Gyroscope Signal Demodulate

作　　者：李锦明[1,2] 李泽明[1,2] 杨燕姣[1,2] 

机构地区：[1]中北大学电子测试国家重点实验室,太原030051 [2]中北大学仪器科学与动态测试教育部重点实验室,太原030051

出　　处：《传感技术学报》2014年第1期79-83,共5页Chinese Journal of Sensors and Actuators

摘　　要：在激光陀螺信号解调领域中,在满足高精度的前提下如何降低滤波器的延迟一直是相关院所的研究重点。针对此问题,研究了一种新的激光陀螺滤波处理的方法。这种方法采用LMS自适应滤波器原理,分别把机械抖动抖反馈信号作为滤波器的基本输入,把机抖信号、随机噪声和白噪声作为滤波器的参考信号,然后通过FPGA进行数字滤波以及外围控制,最后给出了滤波器的算法实现以及硬件框图。实验结果表明,LMS自适应滤波器有很好的解调效果,经过滤波后的计数值差值在±1个数以内,且延时为1 ms。In the area of Ring Laser Gyro（ RLG） dither stripping,how to reduce the group delay of RLG filter at the premise of high accuracy is one of the most important works that many relative universities and the research departments are undertaking. We put forward a new dither stripping method for RLG. The principle of LMS adaptive filter was used, the mechanical dithered feedback signal were taken respectively as the basic input, and the mechanical dithered signal,random noise,white noise were regarded as the reference signal,then filter algorithm and control unit were completed in the XILINX FPGA. Experimental results show that LMS adaptive filter has a wonderful result for the RLG dither stripping,residual count of RLG can be controlled within ±1 after filtering,and only 1 ms of delay.

关 键 词：激光陀螺 抖动解调 自适应滤波器 FPGA数字滤波 

分 类 号：TN249[电子电信—物理电子学] V241.5[航空宇航科学与技术—飞行器设计]