转子系统碰摩故障实验研究进展与展望  

Review and prospect on the research of rub-impact experiment of rotor systems

作　　者：马辉[1] 杨健[1] 宋溶泽[1] 能海强[1] 闻邦椿[1] 

机构地区：[1]东北大学机械工程与自动化学院,沈阳110819

出　　处：《振动与冲击》2014年第6期1-12,共12页Journal of Vibration and Shock

基　　金：中央高校基本科研业务费专项资金资助(N100403008);教育部新世纪人才支持计划(NCET-11-0078)

摘　　要：针对旋转机械出现的转定子碰摩故障,对实验研究进行全面综述。简单介绍模拟单点、局部及整周碰摩所用实验装置,分析三种碰摩形式出现的典型实验现象;局部碰摩故障在工程实际中为主要碰摩形式,据研究对象将其划分为简单转子系统局部碰摩、复杂转子系统局部碰摩、旋转叶片-机匣局部碰摩及实际机组局部碰摩;并对三种碰摩形式典型故障特征进行对比,分析转定子碰摩实验研究发展方向。Aiming at the rub-impact fault between rotor and stator in rotating machinery,the development about rub-impact experiments was summarized.The rub-impact experimental devices for single point rub-impact,local rub-impact and full annular rub-impact were introduced and typical experimental phenomena caused by these three types of rub-impacts were analyzed.The main rub-impact mode in practical engineering is the local rub-impact.According to different objects,local rub-impact experiments were divided into four types：①local rub-impact in simple rotor system,②local rub-impact in complicated rotor system,③local rub-impact in rotating blade-casing,④local rub-impact in practical unit.The typical fault features of the three types of rub-impacts were compared and the new research directions about rub-impact experiments were suggested.

关 键 词：碰摩 转子系统 实验研究 故障特征 碰摩装置 

分 类 号：TH113[机械工程—机械设计及理论]