高支精梳棉经编无缝服装的开发  

Development of Warp Knitted Seamless Garment with High Count Combed Cotton Yarn

作　　者：王水 王敏其 关会成[2] 龙海如[2] 

机构地区：[1]常州市武进五洋纺织机械有限公司,江苏常州213164 [2]东华大学纺织学院,上海201620

出　　处：《针织工业》2014年第3期1-3,共3页Knitting Industries

摘　　要：阐述采用高支精梳棉纱开发经编无缝服装的研发思路,包括原料选择以及整经、编织过程中工艺参数的确定及注意事项。并结合一款高支精梳棉经编无缝服装的开发实例,介绍了其生产工艺:整经时,每个经轴盘头4个,盘头头份为616,整经速度100 m/min,整经转数为3 000 r,整经时KFD张力器刻度均调至10;编织设备选用GE2396型三维成形经编机,地梳穿入5.8 tex高支精梳棉纱,贾卡梳穿入锦氨包覆纱(33.3 dtex锦纶包22.2 dtex氨纶),织物的牵拉密度均为10横列/cm。高支精梳棉经编无缝服装的开发使经编无缝产品档次得到提升,具有较强的市场竞争力。This paper mainly presents about how to develop warp knitted seamless garment with high count combed cotton yarn, including yarn selection, the determination of technological parameters in the process of beam- I ing and knitting, as well as the precautions. Taking the knitting of garment with high count combed cotton yarn as an example, it introduces the complete process. During beaming, every warp sheet is supplied by 4 beams, and there are 616 ends in each beam; the warp speed reaches 100 meters per minute, warping revolution is 3 000, and KFD tensioner goes to its top of 10. Developed on GE2396 warp knitting machine, the ground bar is fully threaded by combed yarn（5.8 rex）, the jacquard bar by spandex warpped by nylon yarn（spandex of 22.2 dtex and nylon of 33.3 dtex）, the take-up densities are all 10 courses per cm. Finally it points out that the warp knitted garment with cotton yarn is high grade and more competitive.

关 键 词：高支精梳棉纱 经编无缝服装 整经工艺 编织工艺 产品开发 

分 类 号：TS186.3[轻工技术与工程—纺织材料与纺织品设计]