基于ADINA的铅芯橡胶支座对渡槽隔震效果的数值模拟  

Numerical Simulation of Lead Rubber Bearing Effect on Aqueduct Isolation Based on ADINA

作　　者：王化翠 卢兴旺[2] 苑司乐 

机构地区：[1]河海大学水利水电学院,江苏南京210098 [2]天津市滨海水业集团股份有限公司,天津300381 [3]河南黄河勘测设计研究院北京分院,北京100073

出　　处：《华东交通大学学报》2014年第1期114-118,共5页Journal of East China Jiaotong University

摘　　要：采用有限元分析程序ADINA建立铅芯橡胶支座的有限元模型,通过施加水平循环正弦位移荷载,得出了铅芯橡胶支座的滞回曲线,与试验曲线吻合良好,验证了数值模拟方法的正确性;将铅芯橡胶支座应用到某渡槽实际工程,建立了渡槽-支座-水体的流固耦合抗震分析数值模型,并进行了计算分析;结果表明,运用铅芯橡胶支座后渡槽结构的地震响应显著降低,隔震效果明显,结构抗震性能得到提高。The finite element model of the lead rubber bearing was established by using ADINA in this study. Through a horizontal cyclic sinusoidal displacement load,the hysteretic curve of lead rubber bearing was ob-tained, which was in good agreement with the test curve and the numerical simulation method was verified. Then the lead rubber bearing was applied to an aqueduct engineering,and a numerical model for fluid-structure coupling seismic analysis of aqueduct-bearing-water was established. The calculation results show that the seis-mic response of aqueduct structures has decreased after using lead rubber bearings, and the vibration isolation ef-fect is obvious, which means the structural seismic performance has been improved.

关 键 词：铅芯橡胶支座 渡槽 隔震 ADINA 

分 类 号：TV312[水利工程—水工结构工程]