检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]西安邮电大学电子工程学院,西安710121 [2]西安邮电大学通信与信息工程学院,西安710121
出 处:《半导体光电》2014年第1期15-18,60,共5页Semiconductor Optoelectronics
基 金:西安市科技计划资助项目(CX12188)
摘 要:增益平坦度是衡量光纤通信中喇曼光纤放大器的关键参数之一。文章从级联光纤实现喇曼增益谱平坦技术的分析理论入手,改进了实现喇曼增益谱平坦的约束条件,利用Matlab分析了光纤损耗对RFA增益谱平坦度的影响。结果表明:在喇曼光纤放大器系统中,C波段各个光之间不同的损耗系数是影响增益平坦度的关键因素,即信号光之间损耗系数的不同会引起喇曼光纤放大器的增益平坦度劣化,各个被放大信号光之间的损耗系数相差越大,则增益平坦度越差。Based on the theoretical analysis for realizing the Raman gain spectrum flattening technique, the constraints of Raman gain spectrum flatness were improved. Matlab was used to analyze the effects of fiber loss on the flatness of gain spectrum of RFA. The results show that: in the Raman fiber amplifier system, different loss coefficient between each light in C-band is one of the key factors of gain flattening, which means different loss coefficient between the signal lights can cause the deterioration of the gain flatness of Raman fiber amplifier, the loss coefficient difference of each signal light is bigger, and the gain flatness of Rarnan fiber amplifier is greater.
关 键 词:光纤通信 喇曼光纤放大器 级联光纤 增益平坦 损耗系数
分 类 号:TN253[电子电信—物理电子学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.171