A hearing aid on-chip system based on accuracy optimized front-and back-end blocks  

A hearing aid on-chip system based on accuracy optimized front-and back-end blocks

在线阅读下载全文

作  者:李凡阳 江浩 

机构地区:[1]Key Laboratory of Microelectronics of Fujian Province, Fuzhou University

出  处:《Journal of Semiconductors》2014年第3期137-145,共9页半导体学报(英文版)

基  金:Project supported by the National High Technology Research and Development Program of China(No.2008AA010701)

摘  要:A hearing aid on-chip system based on accuracy optimized front- and back-end blocks is presented for enhancing the signal processing accuracy of the hearing aid. Compared with the conventional system, the accuracy optimized system is characterized by the dual feedback network and the gain compensation technique used in the front-andback-endblocks,respectively,soastoalleviatethenonlinearitydistortioncausedbytheoutputswing.By usingthetechnique,theaccuracyofthewholehearingaidsystemcanbesignificantlyimproved.Theprototypechip has been designed with a 0.13 m standard CMOS process and tested with 1 V supply voltage. The measurement results show that, for driving a 16 loudspeaker with a normalized output level of 300 mV p-p, the total harmonic distortion reached about60 dB, achieving at least three times reduction compared to the previously reported works. In addition, the typical input referred noise is only about 5 υV rms.A hearing aid on-chip system based on accuracy optimized front- and back-end blocks is presented for enhancing the signal processing accuracy of the hearing aid. Compared with the conventional system, the accuracy optimized system is characterized by the dual feedback network and the gain compensation technique used in the front-andback-endblocks,respectively,soastoalleviatethenonlinearitydistortioncausedbytheoutputswing.By usingthetechnique,theaccuracyofthewholehearingaidsystemcanbesignificantlyimproved.Theprototypechip has been designed with a 0.13 m standard CMOS process and tested with 1 V supply voltage. The measurement results show that, for driving a 16 loudspeaker with a normalized output level of 300 mV p-p, the total harmonic distortion reached about60 dB, achieving at least three times reduction compared to the previously reported works. In addition, the typical input referred noise is only about 5 υV rms.

关 键 词:front-end back-end pre-amplifier driving amplifier hearing aid 

分 类 号:TN432[电子电信—微电子学与固体电子学]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象