间断供能的引信装定数据双向传输方法  

Fuze Setting Data Two-way Transmission Based on Intermittent Energy Supplying

作　　者：杜军[1] 李红英[1] 马君[1] 王秋生[1] 徐昕[1] 

机构地区：[1]西安机电信息技术研究所,陕西西安710065

出　　处：《探测与控制学报》2014年第1期80-83,共4页Journal of Detection & Control

摘　　要：现有的感应装定引信电路在装定信息反向传输过程中能量利用率低,因此大容量数据在传输过程中引信没有足够的能量接收数据。针对此问题,提出间断供能的引信装定数据双向传输方法。该方法中装定器对引信间断供电,在数据下传完成后,装定器依据数据多少字节停顿1ms左右,在这期间内引信将数据上传回去,由装定器检测判断反向传输数据是否正确,从而判断装定正确与否。试验表明,该方法能可靠的实现装定数据反向传输,并有效提高装定信息反向传输阶段的能量利用率,使大容量数据能可靠的传输。The existing fuze circuit for inductive setting is of low efficiency of energy using in reverse informa-tion transporting,therefore,large volumes of data dose not have enough energy in the process of data transpor-ting.To solve that problem,a intermittent energy supplying method of setting data for fuze is proposed.The fuze setter supplied electricity for fuze intermittently.When the downloading of data finished,fuze setter paused about 1 ms according to the amount of byte.During this period,fuze uploaded the data back and the setter would j udge whether the reverse transporting was correct,then to decide whether the fuze was correctly set. Experiment showed that,this method could achieve reverse data transporting of setting data reliably,and im-proved the using efficiency of energy,which made large volume of data transporting safely.

关 键 词：引信 装定器 感应装定 间断供能 反向传输 

分 类 号：TJ432.4[兵器科学与技术—火炮、自动武器与弹药工程]