检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王占选 赵冬娥[1,2] 刘吉[1,2] 于爽[1,2] 王磊[1,2]
机构地区:[1]中北大学电子测试技术重点实验室,山西太原030051 [2]中北大学仪器科学与动态测试教育部重点实验室,山西太原030051
出 处:《探测与控制学报》2014年第1期84-87,共4页Journal of Detection & Control
基 金:教育部科学技术研究重点项目资助(211027)
摘 要:针对高速摄影领域中采用外加辅助照明光源获取的图像效果欠佳、光源设备成本高以及在户外使用不便等问题,提出了基于像增强器的高速图像采集方法。该方法以9350EOS-3-PRO三代像增强器和MC1362高速相机为实验平台,设计了二者之间的接口转换模块使之能够很好的匹配连接,从光谱响应和亮度增益两个方面对图像采集系统进行实验和分析。验证结果表明,该方法在低照度环境下能显著提高成像效果,但在高照度环境下工作容易饱和,有待进一步改善。High speed photography of adding a auxiliary light source had the shortages of poor image quality, high light equipment costs and inconvenient outdoor use,a high speed image acquisition method based on image intensifier was put forward in this paper.Experiment had been done with this method based on the platform composed of 9350EOS-3-PRO third generation image intensifier and MC1362 high speed camera.The image in-tensifier interface converter module between them was designed so that it could match well.Analysis for the spectral response and luminance gain of the imaging system showed that the system could improve the image quality significantly in the low illumination,but likely to occur saturate in the high illumination and need further improvement.
关 键 词:高速摄影 像增强器 接口转换 光谱响应 亮度增益
分 类 号:TN144[电子电信—物理电子学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.131.37.22