不同光敏剂对光敏热成像材料感光性能的影响  

The Effect of Different Photosensitizers on the Photographic Performance of PTG Materials

作　　者：李秋艳[1] 李剑[1] 马望京[2] 李金培[2] 

机构地区：[1]江苏师范大学化学化工学院,江苏省功能材料绿色合成重点实验室,江苏徐州221116 [2]中国科学院理化技术研究所,北京100190

出　　处：《影像科学与光化学》2014年第2期209-215,共7页Imaging Science and Photochemistry

基　　金：江苏师范大学自然科学研究基金(12XLR018);江苏省功能材料绿色合成重点实验室开放课题(K201302)资助

摘　　要：本文考察了不同制备方法、不同种类的光敏剂对以苯并三氮唑银为银源的光敏热成像材料感光性能的影响。结果显示原位法中以AgI和AgBrI为光敏剂的PTG材料具有较高的感光度,分别为以AgBr为光敏剂的参比样片感光度的16倍和2.4倍;异位法制备的PTG材料中,以AgBrI乳剂为光敏剂的感光度比以AgBr为光敏剂的感光度高,是其3倍;此外,同是以AgBr为光敏剂、用异位法制备的PTG材料的感光度比原位法制备的PTG材料感光度高。文中初步分析讨论了出现以上实验结果的原因。The effect of different kinds of photosensitizers on the photographic performances of photothermographic materials based on silver benzotriazole was studied.It is found that both PTG materials with AgBrI and AgI as photosensitizers have a higher sensitivity than the PTG material with AgBr photosensitizer in the in-situ systems,the sensitivity is 16 times and 2.4 times as high as the control one.In the ex-situ PTG materials,the sensitivity of the PTG materials with AgBrI emulsion as photosensitizer is 3 times as high as the PTG materials with AgBr emulsion as photosensitizer.Besides,between of the in-situ PTG materials and ex-situ PTG materials with the same AgBr emulsion as photosensitizer,the latter has a higher sensitivity than the former.And the relevant factors were primarily investigated.

关 键 词：光敏热成像材料 苯并三氮唑银 光敏剂 感光度 

分 类 号：TQ571[化学工程—精细化工]